Check The Scope Of Delivery; Get To Know Your Device; Intended Purpose - Meister MEH900-1 Traduction Du Manuel D'utilisation Original

• Do not mount the electrical plane
to a stationary mechanism. The
electrical plane is only suitable for
manual operations.
• Do not plane against the direction
of feed motion. When planing against
the feed direction, the electrical plane
may be kicked out of your hand.
• Always plane using both hands. When
planing with just one hand, you may
lose control over the electrical plane.
• Consider the unavoidable residual
risks when working with the
electrical plane. The following risks
are present even when the safety
mechanisms are in place:
• Injury caused by touching the rotating
blades
• Injury caused by breaking and flying
work piece parts
• Fire caused by overheating of the
motor in the event of insufficient
removal of shavings
• Only hold the power tool by the
insulated handles since the blade
shaft is capable of cutting its own
power cable. Contact with a power-
carrying cable may also energise
metal parts of the device and cause
an electric shock.
• Affix and secure the work piece to
a stable surface using clamps or
another suitable method. If you hold
the work piece with your hand only
or up against your body, it will be
unstable which may lead to a loss of
control.
• When the mains connection cable of this
device is damaged, it must be replaced
with a special connection cable that can be
obtained from the manufacturer or their
52
customer service.
MW-5460140-Bedien-2005.indd 52 MW-5460140-Bedien-2005.indd 52
• Wear a dust protection mask when using
the device.
3 – Check the scope of
delivery
Figure 3-1:
No. Description
1 Electrical plane
2 Tool case
3 Allen key
4 Fork key
5 Shavings collection bag
6 Replacement drive belts
7 Carriage bolt
8 Mounting bracket for side stop
9 Handle screw
10 Handle nut
11 Side stop
12 Handle screw
13 Depth stop
Check the scope of delivery for
completeness and perfect condition.
In the event of missing or damaged parts:
• Do not operate the device.
• Make a complaint to the dealer.
4 – Get to know your
device

Intended purpose

The electrical plane is designed only
for manual planing and chamfering of
permitted materials in domestic use.
The electrical plane is not designated for
commercial use. Any other type of use
is inappropriate! The consequences of
inappropriate use may be:
07.05.20 11:22 07.05.20 11:22