Power Tool Use And Care - Meister MEH900-1 Traduction Du Manuel D'utilisation Original

tool on. A wrench or a key left
attached to a rotating part of the
device may result in personal injury.
• Avoid unnatural body positions.
Ensure that you are standing
securely and keep your balance at
all times. This enables better control
of the power tool in unexpected
situations.
• Wear suitable clothing. Do not wear
loose clothing or jewellery. Keep
hair, clothing and gloves well away
from moving parts. Loose clothes,
jewellery or long hair can be caught
in moving parts. Rubber gloves and
non-slip footwear are recommended
when working outdoors.
• If facilities are provided for the
connection of a dust extractor and
collection facilities, ensure these
are connected and properly used.
Use of these mechanisms can reduce
dust-related hazards.
• Do not remove or manipulate the
safety mechanisms of the power
tool.
• Do not make modifications to the
power tool or to parts of the device.
• Only put down the power tool when
it has been switched off and is at a
standstill.
• Separate the power tool from the
power supply when it is not in use.

Power tool use and care

• Do not overload the device. Use
the appropriate power tool for the
task in hand. The correct power
tool will do the job better and safer
50
MW-5460140-Bedien-2005.indd 50 MW-5460140-Bedien-2005.indd 50
in the power range for which it was
designed.
• Do not use a power tool if the
switch is defective. Any power tool
that cannot be controlled with the
switch is dangerous and must be
repaired.
• Disconnect the plug from the
power source and/or remove
the rechargeable battery before
making any adjustments, changing
accessories, or storing the device.
Such preventive safety measures
reduce the risk of starting the power
tool accidentally.
• Keep power tools that are not
in use stored out of the reach of
children. Do not allow persons to
operate the device who are not
familiar with it, or who have not
read these instructions. Power
tools are dangerous in the hands of
untrained users.
• Treat your power tools with care.
Check for proper functioning of
moving parts and that they do not
jam, breakage of parts and any
other damage that may affect the
power tools operation. If damaged,
have the power tool repaired before
use. Have any damaged parts
repaired before using the device.
Many accidents are caused by poorly
maintained power tools.
• Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to
jam and are easier to control.
• Use the power tool, accessories
and other tools etc., in accordance
with these instructions. Take
07.05.20 11:22 07.05.20 11:22