Configuration Of The Wi-Fi Module - BWT PRO A Notice D'installation Et Conseils D'utilisation

7.6

Configuration of the Wi-Fi module

This paragraph is relevant to devices fitted with the optional Wi-Fi kit option.
TRAITEMENT DE L'EAU
CONNECTION
Network: Once the WIFI module is connected, restart your unit. The
Network option will appear in the Settings menu.
WIFI: Select WIFI to scan for available networks that the module
can access. The search will be carried out automatically.
Select the desired network. Enter the password using the pop-up
keyboard. Navigate up and down using the up/down keys and left to
right using the plus/minus keys. To select a letter press OK.
Selecting the access point: Enter the name and the password of the
network selected.
System settings: For a more detailed configuration enter into this
menu or contact your installer.
Status: Check the status of your connection.
Once the WIFI module has been connected to the network and both
lights are ON, go to www.poolwatch.hayward.fr. Access the Register
option and enter all the data requested. The unit ID node can be
found on your device (see paragraph 7.1, Configuration of the User
interface, screen 13 and 14). Upon completion of the process, you
will have total control over your pool and you will be able to change
parameters such as set points and filtration windows.
WIFI MODULE
1. Black
2. Green
3. Yellow
4. Red
2021/03 - Indice de révision : B Code : 29740
51/88