BWT PRO A Notice D'installation Et Conseils D'utilisation page 35

Description
Sensor housing,
3 positions
Optional pH kit
Optional Redox kit
Optional Wi-Fi kit
Optional Flow-switch kit
installed as standard on
the PRO LS 300 model,
available as an option for
other models
TRAITEMENT DE L'EAU
Qty Comments
The housing
temperature
accommodate the pH and Redox
sensors if these options were added.
1
Install it on a by-pass loop between
the filtration pump and the filter (see
the hydraulic diagram para 4.1)
This kit comprises:
• Peristaltic pump, 1.5 l/h for pH
reducedr and 1.5 m cable
• pH sensor
• 1 sensor thermowell
• 1 cable gland
1
• 1 saddle clamp, solvent
• 3 buffer solutions: distilled water,
pH = 7, pH = 10
• 1 reader to be mounted on the
motherboard in the control panel
This kit comprises:
• Redox sensor
• 1 sensor thermowell
• 1 cable gland
• 1 saddle clamp, solvent
1
• 1 neutral solution,
• 1 465 mV solution
• 1 reader to be mounted on the
motherboard in the control panel
(same for pH and Redox)
• 10 m cable
1
• Wi-Fi module
• 1 saddle clamp, 3/4"
1
• 1 flow-switch with 1.5 m cable
holds the water
sensor, and can
2021/03 - Indice de révision : B Code : 29740
Int.diam. = 50 /
Ext.diam. = 63
2 holes with caps on one
side, 1 on the other side
35/88