BWT PRO A Notice D'installation Et Conseils D'utilisation page 50

50/88
2021/03 - Indice de révision : B Code : 29740
Automatic mode (with timer):
In this mode the lights will on during the programmed intervals (start/
stop times), that will repeat at a frequency selected by the user:
- every day,
- every 2 days,
- every 3 days,
- every 4 days,
- every 5 days,
- every week,
- every 2 weeks
- every 3 weeks
- every 4 weeks
Selecting the time interval:
1. Press the Down key to navigate to the time interval.
2. Use the Plus/ Minus keys to access the start time hours: select
the hour using the Plus/ Minus keys.
3. Use the Up key to access the start time minutes field: set the
minutes using the Plus/ Minus keys.
4. Press OK to confirm or Escape to cancel.
Selecting the frequency:
5. Use the Down key to navigate to frequency.
6. Use the Up/Down keys to access frequency setting.
7. Select the frequency using the Plus/ Minus keys
8. Press OK to save or Escape to cancel. Proceed in the same way
to set the stop time.
Selecting the LED underwater light colour change mode:
If colour LED underwater lights are installed, the colour change
sequence can be controlled.
By activating the Next Program option, the LED light will change
from the current static colour to the next, the Pulse Length menu item
sets the frequency of the automatic colour change in seconds. The
colours will change in the order programmed by the manufacturer of
the underwater light.
TRAITEMENT DE L'EAU