Tuner; Listening To The Radio - Sony MHC-ECL99BT Mode D'emploi

Tuner

Listening to the radio

1
Select the tuner function.
For North American model
Press TUNER (or FUNCTION on the
unit repeatedly) to select the FM
function.
For other models
Press TUNER (or FUNCTION on the
unit) repeatedly to select the FM or
AM function.
2
Perform tuning.
For automatic scanning
Press PLAY MODE/TUNING MODE
repeatedly until "AUTO" appears,
and then press TUNING+/TUNING–.
Scanning stops automatically when
a station is found.
If the scanning does not stop, press
 to stop scanning, then perform
manual tuning (below).
For manual tuning
Press PLAY MODE/TUNING MODE
repeatedly until "MANUAL" appears,
and then press TUNING+/TUNING–
repeatedly to tune to the desired
station.
When you tune to a station that
provides RDS services, the station
name appears on the display
(European model only).
Hint
To reduce static noise on a weak FM stereo
station, press REPEAT/FM MODE repeatedly
until "MONO" appears to turn off stereo
reception. You will lose stereo effect, but
reception will improve.
14
GB
Presetting radio stations
1
Tune to the desired station.
2
Press TUNER MEMORY to
select the tuner memory
mode.
3
Press PRESET+/PRESET–
repeatedly to select the
desired preset number.
If another station is already
assigned to the selected preset
number, the station is replaced by
the new station.
4
Press to store the station.
5
Repeat steps 1 through 4 to
store other stations.
The preset stations are retained
for about half a day even if you
disconnect the power cord or if a
power failure occurs.
For North American model
You can preset up to 20 FM
stations.
For other models
You can preset up to 20 FM and
10 AM stations.
To tune to a preset radio station
If you registered a radio station to a
preset number 1 to 4, the radio station
will be tuned in by just pressing the
TUNER MEMORY NUMBER (1 to 4)
when the tuner function is selected.
If you registered a radio station to a
preset number 5 or higher, press PLAY
MODE/TUNING MODE repeatedly
until "PRESET" appears then press
PRESET+/PRESET– repeatedly to select
the desired preset number.