Welch Allyn StrabismoScope 12400 Mode D'emploi page 4

To change the lamp, remove the
StrabismoScope from its power source.
Remove the lamp from the base of the
instrument by prying out with fingernail,
nail file, or other instrument.
Taking care not to touch the glass surface,
replace lamp by inserting lamp into base of
instrument so that the lamp "key" drops into
either slot. (Push lamp in until firmly sealed.)
Replacement lamp is a Welch Allyn
No. 03000 Halogen Lamp.
For Guaranteed Performance
Use Only Genuine Welch Allyn Lamps.
4