Expanding The Telephone System - switel DFT 737 Série Mode D'emploi

12 Expanding the Telephone System

You can register more handsets of the same type on the base
station. Each handset can only be registered on up to four base stations
simultaneously.
Multiple Handsets
You can register a total of 4 handsets of the type DFX73XX on your base
station.
Registering handsets on a specific base station
Before starting with the registration process for a handset, switch the base
station to Registration mode.
3 sec ‘
The LED on the base station flashes as long as it remains in Re-
gistration mode.
To register a handset on a base station, open the menu and select the
REGISTRATION function. Select one of the 4 memory locations for the
base station. . Page 101
Memory locations already assigned are identified by a tick following the
memory location. These can be overwritten through a new registration pro-
cess.
When registration is completed, the message ACCEPTED appears in
the display. The handset is also assigned an internal call number which
also appears in the display. This is important in order for making internal
calls and performing other registration/deregistration processes.
If the registration process has failed, the message RETRY?
in the display. Complete the registration process again.
To test whether the handset really is registered on the base sta-
tion, press the Paging button. When registration has been suc-
cessful, the handset rings. Press the Paging button again to stop
the ringing.
Activate Registration mode
appears
Expanding the Telephone System
Deregistering handsets from a base station
A handset can only be deregistered from a base station using an-
other handset registered to that base station.
To deregister a specific handset from a base station, open the menu, se-
lect the DEREGISTRATION function and then select the name or
number of the handset to be deregistered. . Page 101
When deregistration is completed properly, the message ACCEPTED
appears in the display.
If the deregistration process has failed, the message RETRY? appears
in the display. Complete the deregistration process again.
Multiple base stations
Your handsets can be simultaneously registered on up to 4 different base
stations of the type DFT737X. Each base station requires its own tele-
phone line socket. Connections can be used with the same call number or
with different ones.
. Page 101
Calls in progress, however, cannot be transferred from one base
station to another.
Increasing the range
Position the base stations so that the ranges of the individual base stations
overlap. Test the ranges of the handsets because obstructions in buildings
restrict the range.
Register all the handsets on all the base stations. Activate the AUTO
function (automatic selection of base stations). . Page 101
Regardless of where you are, the handset automatically attempts to con-
nect to the next base station with the best connection.
105