Putting The Telephone Into Operation - switel DFT 737 Série Mode D'emploi

Putting the Telephone into Operation

2 Putting the Telephone into Operation
Safety information
Caution: It is essential to read the Safety Information in
Chapter 1 before starting up.
122
Package contents
The package contains:
Contents
Base station(s) with large power
adapter plug (8V DC 500mA)
Charging station(s) with small
power adapter plug
(6V DC 300mA)
Handset(s)
Telephone line
Batteries
Belt clip(s)
Operating instructions
Connecting the base station
Caution: Position the base station or charging station at least 1
m away from other electronic devices, otherwise there is a risk of
mutual disturbance.
Connect the base station as illustrated in the diagram. For reasons of
safety, only use the power adapter plug and telephone connection line
supplied.
Ensure you connect the larger power adapter plug to the base
station, otherwise the answering machine will not work properly.
*
Refer to www.switel.com to see if this telephone set is already
available.
86
DFT model
737 7372 7373
1 1 1
− 1 2
1 2 3
1 1 1
3 6 9
1 2 3
1 1 1
123
Mains power outlet
* *
7374
1
Connecting the charging station
3
Connect the charging station as illustrated in the diagram.
For safety reasons, only use the power adapter plug supplied.
4
Mains power outlet
1
12
4
1
Inserting the batteries
Insert the batteries in the open
battery compartment. Only
use batteries of the type AAA
Ni−MH 1.2V. Pay attention to
correct polarity. Close the bat-
tery compartment cover.
1
Only applies to models with at least two handsets.
. Section Package contents" on Page 86
Telephone line socket
1
− AAA +
+ AAA −
− AAA +