Introductory Information - switel DFT 737 Série Mode D'emploi

4 Introductory Information

This chapter contains basic information on using this operating manual
and the telephone.
Notation used in the operation instruction manual
Notation Description
!
Represents a button/key
*
Press the button depicted briefly
3 sec *
Press the button depicted for 3 seconds
ë
Enter digits or letters
{í}
Handset rings
è
Remove the handset from the base station
é
Place the handset in the base station
Represents texts which appear in the display
MUTE
Represents icons which appear in the display
Icons and texts in the handset display
Icon Description
A connection to the base station is available.
If the connection deteriorates, you will hear the
acoustic range warning signal.
The handset no longer has a connection to the
OUT OF RANGE
base station. Move nearer to the base station.
The key lock is activated. . Page 92
The ringing tone has been switched off.
. Page 92
The alarm clock is activated. . Page 104
Enter text in small letters. . Page 102
Indicates a new voice message has been re-
corded if the answering machine in the tele-
phone network is activated (supplementary ser-
vice offered by your telephone network pro-
vider). . Page 98
Full battery charge capacity.
Low battery charge capacity. You will also hear
the battery warning signal. Please charge the
LOW BATTERY
telephone.
Run−through segments:
Batteries are being charged. . Page 87
Name of the handset. . Page 100
HANDSET 1
Time display. . Page 100
OO:OO
Handsfree mode has been activated.
SPKR
. Page 92
The microphone is switched off. . Page 92
MUTE
A normal telephone call is taking place.
TALK
125
Standby mode
The following operating instructions assume that the handset is in Standby
mode.
The buttons and the display light up when Standby mode is active.
In addition, READY appears in the display.
Activate Standby mode by pressing the ‚ button.
Energy−save mode
When the handset has been in Standby mode for some time, it automati-
cally switches to energy−save mode. The buttons and display are no
longer lit up. The time appears in the display.
Press any button to reactivate Standby mode.
Introductory Information
89