Publicité
Les langues disponibles
Les langues disponibles
4
Installation procedure
Installation
Installation
Remove the standard outlet pipe from the outlet port of the pump
and install the proper model of Oil Mist Trap instead.
Figure 3
When operation pressure is below 40 Pa the trapped oil return to the pump
CAUTION!
automatically.
When operating pressure is higher than 40 Pa periodically shut down of about 5
minutes or high vacuum (below 40 Pa) operation is required.
40/52
Oil Mist Trap installed
Oil Mist Trap User Manual / 87-900-148-01
Publicité
Chapitres
