Element For Replacement Procedure - Agilent Technologies X3703-64003 Mode D'emploi

Element for replacement procedure

The number in the circle indicates parts of Oil Mist Trap Components
(Fig. 4).
13 Before exchanging Element and Gasket, remove the Oil Mist Trap
15 Turn screw ⑮ counter clockwise with a screwdriver.
14 See Fig. 4 and Table 2.
16 Remove screw and then remove the seal washer ⑫.
17 Remove the top cover ①.
18 Remove the element ⑪ and then remove the element stopper ③
19 Put the element stopper ③ on the gasket ⑬.
20 After replacing the element ⑪ with the new one, put the element
21 Put top cover ① on element ⑪.
22 Then put the screw ⑮ into the seal washer ⑫ and fix Case ②.
23 Put screw ⑮ into the case ②.
24 Do not take it apart except the parts above mentioned.
Oil Mist Trap User Manual
from the pump.
and the gasket ⑬ from case ②.
⑪ on element stopper ③.
/ 87-900-148-01
Installation procedure

Element for replacement procedure

4
43/52