F-Mode Setup - Spektrum DX8G2 Manuel D'utilisation

Masquer les pouces Voir aussi pour DX8G2:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

EN
SYSTEM SETUP
Model Name
Model Name enables you to assign a custom name to the current
model memory. Model names can include up to 20 characters,
including spaces.
To add letters to a Model Name:
1. Scroll to the desired letter position and press the scroll wheel
once. A flashing box appears.
2. Scroll left or right until the desired character appears. Press
the scroll wheel once to save the character.
3. Scroll to the next desired letter position. Repeat Steps 1 and
2 until the Model Name is complete. Insert a character by
selecting <+> or delete a character by selecting <->.
4. Select BACK to return to the System Setup list.
To erase a character:
1. Press CLEAR while the character is selected.
2. Press CLEAR a second time to erase all characters to the right
of the cursor.
Aircraft Type 
This menu only available in Airplane Mode. See ACRO (Airplane) section for set up.
Sailplane Type 
This menu only available in Sailplane Mode. See SAiL (Sailplane) section for set up.
Swash Type
This menu only available in Helicopter Mode. See HELi (Helicopter) section for set up.
Aircraft Options 
This menu only available in Multirotor Mode. See MULTi (Multirotor) section for set up.

F-Mode Setup

Use the Flight Mode Setup menu to assign switches to
flight modes.
Mode
Number of Switches
ACRO
2
HELI
3 (including Throttle Hold)
SAIL
3
MULTI
2
Sailplane Flight Mode Setup
You can assign up to five flight modes using any combination of
up to two switches. You can also assign a priority switch. When
the priority switch position is active, only the current flight mode
is active, regardless of other switch positions.
16
Number of Flight Modes
5
5 (including Throttle Hold)
10
5
Sailplane Flight Mode Table
You can assign the available flight modes (up to 5 for Sail) to each of
the switch positions (up to 2 switches can be used for sailplane). Press
NEXT from the Flight Mode Name page to access the flight mode table
assignment page when Custom flight mode has been selected in the
Flight Mode Setup page. The combination of up to 2 switches can be
used to access all of the flight modes available.
Number
of Flight
2
3
Modes
Switch 1
(number of
2P
3P
positions)
Switch 2
(number of
positions)
Flight
Mode
Launch Launch
1
2
Cruise
Cruise
3
Land
4
Thermal Thermal Thermal Thermal
5
*Must be set up in a 4/5 flight mode
SPEKTRUM DX8G2 • TRANSMITTER INSTRUCTION MANUAL
3*
4
4
2P
2P
3P
3P
2P
3P
2P
3P
Launch
Launch
Launch
Launch
Cruise
Cruise
Cruise
Cruise
Land
Land
Speed
Speed
.
5

Publicité

Table des Matières
loading

Table des Matières