Fan (H Series) Mounting To The Filtration Unit - Kemper 150 0004 Mode D'emploi

5.5 Fan (H Series) Mounting to the Filtration Unit

Put the fan (pos. 1) with the extraction opening on the filtration unit opening and
●
screw it from the internal side of the unit using the screws attached.
Screw on the adapter piece (pos. 14) for extraction system silencer (pos. 2) to
●
the fan blowing opening (see detail A).
Install the extraction system holder (pos. 15) on he free end of the silencer (pos. 2).
●
Now install the extraction system silencer (pos. 2) on he free end of the adapter
●
piece (pos. 14) and level the extraction system silencer horizontally.
After extraction system silencer levelling, install the wall bracket (pos. 16) now
●
and connect it to the extraction system silencer (pos. 15).
Order No.: 150 0004
Technical changes and errors reserved.
KEMPER Welding Fumes Stationary Filter
- 64 -
Instruction Manual - EN
rev.: 0
Status as of: 04/2014