Delay Interval; Temperature; Date / Time Stamp; Set Date / Time - Minox DTC 500 Mode D'emploi

and press OK or the Right button to enter the submenu.
Press the Up / Down buttons to select the desired burst
sequence and then OK to save the setting. This will bring
you back to the main menu.

Delay Interval

Use this function to set your DTC 500 to capture images
after a pre­set time interval has elapsed between photos
or videos. You can set the time lapse of 5s, 10s, 20s,
30s, 1min, 5min, 10min, 30min or 60min before the next
image should be made. Go to "Delay Interval" in the
main menu and press OK or the Right button to enter
the submenu. Set the desired delay interval by pressing
the Up / Down buttons and then OK to save the setting.
This will bring you back to the main menu.

Temperature

With this setting you can set the temperature unit to be
displayed in your images or videos in degrees of Fahren­
heit or Celsius. Go to "Temperature" in the main menu
and press OK or the Right button to enter the submenu.
Set the desired temperature unit by pressing the Up /
Down buttons and then OK to save the setting. This will
bring you back to the main menu.

Date / Time Stamp

This setting enables you to set and display information
such as the date, time and temperature as a time stamp
on each photo / video recording. Go to "Date / Time
Stamp" in the main menu and press OK or the Right
button to enter the submenu. Presss the Up / Down
buttons to choose between "Yes" to display the time
stamp or "No" if you do not wish to display the time
stamp. Press OK to save the setting. This will bring you
back to the main menu.

Set Date / Time

This function enables you to set the date and time and
the desired formats to be displayed on each photo /
video recording. Go to "Set Date / Time" in the main
menu and press OK or the Right button to enter the
submenu. Here you can choose between three settings.
Use the Up / Down buttons and then press OK to set
one of the following:
• Date Format
Select the desired format using the Up / Down buttons
and press OK button to save the setting.
Press MENU to return to the main menu.
25