Changing Vacuum Level; Placing Out Of Operation After Use - Medela Vario Mode D'emploi

Specifications:
Altitude Vario 8 / Vario 8 c/i
above Max. Vacuum:
sea level: low vacuum
+ 2000 m – 7.0 kPa
+ 1000 m – 7.9 kPa
+ 500 m – 8.5 kPa
0 m – 9.0 kPa
(Tolerance +/- 10 %)
7.3
Changing vacuum
level
7.4
Placing out of
operation after use
Vario 18 c/i Vario 18
Max. Vacuum: Max. Vacuum:
medium vacuum high vacuum
– 43 kPa – 59 kPa
– 48 kPa – 66 kPa
– 51 kPa – 70 kPa
– 55 kPa – 75 kPa
1.
1.
or
2. If the pump is connected
to a fixed mains socket:
or
If the pump is connected
to a 12 V DC power source:
3. Clean and desinfect the Vario. See chapter 18.
1.1 Clamp patient tubing
1.2 Push and turn vacuum
regulator to select the cor-
rect vacuum according to
the particular application.
1.3 Check vacuum gauge for
setting.
1.1 Switch the on / off switch
of the Vario to position
«0» (c/i - versions: «Off»).
Disconnect the mains plug
from the fixed mains socket.
Disconnect the 12 V DC
plug from the 12 V DC
power source.
Operating instructions
| 17