Setting Interval Times - Medela Vario Mode D'emploi

12 Setting interval times

(c / i versions only)
WARNINGS
Before setting the interval times, switch off the Vario and pull the mains plug from Vario
out of the fixed mains socket.
22 |
Setting interval times
1.
2.
3. Reattach the back cover to the Vario and tighten the 4 screws.
4. Plug the Vario to a fixed mains socket and test the correct
functioning of the Vario (see chapter 7).
1.1 Unscrew the 4 screws on
the back of the Vario.
1.2 Open the Vario by
removing the back cover.
2.1 Determine the location of
the red jumper.
2.2 Place the red jumper
according to the desired
interval:
On-time Off-time
8 sec. 4 sec.
16 sec. 8 sec.
32 sec. 16 sec.