Changing Disposable Liner - Medela Vario Mode D'emploi

9 Changing disposable liner

WARNINGS
Disposable liners are not intended to be reprocessed. Reprocessing could cause loss
of mechanical, chemical and / or biological characteristics.
1.5 l
1.
2.
or
3.
4. Dispose of the liner and patient tubing in accordance with
local guidelines and inhouse guidelines.
5. Prepare new liner, unpack it and insert it in the jar. Press
down lid.
6.
7. Switch on the Vario. The pump will start running.
8. Set vacuum according to the particular application.
See chapter 7.3.
1.1 Remove patient tubing
with colored angle piece
from lid.
1.2 Plug patient port.
2.1 Switch the on / off switch
of the Vario to position «0»
(c/i - versions: «Off»).
Reduce vacuum to
minimum by pressing
and turning vacuum
regulator to the left.
3.1 Remove full liner from the
jar.
6.1 Connect new patient
tubing firmly.
Changing disposable liner
| 19