Replacing Defective Fuse - Medela Vario Mode D'emploi

11 Replacing defective fuse

WARNINGS
Before replacing the fuse, pull the mains plug from Vario out of the fixed mains socket.
1. Disconnect the Vario from the mains.
2.
3. Replace the defective fuse(s). Make sure that the technical
specification are corresponding.
AC-versions:
AC / DC-versions:
4.
5. Reconnect the Vario to the mains again.
6. Switch on the Vario again.
2.1 Open (turn left) the fuse
holder on the bottom of
the Vario.
T 0.8 AL, 5 x 20, 230–240 V
T 1.25 AL, 6.3 x 20, 120 V
T 1.0 AL, 5 x 20, 100–240 V
4.1 Close (push back and turn
right) the fuse holder.
Replacing defective fuse
| 21