Switching Off - EUROM Force 3000 IND Manual D'instructions

 Direct the mouthpiece of the selected accessory
(pointed/flat jet, rotary dust-mill or perhaps the
terrace cleaner) away from you to the surface to be
cleaned.
 Squeeze the trigger until a constant quantity of water
streams through the spray mouth, so that the air in
the hose can escape.
 Let go of the handgrip.
 Turn the switch to "ON".
Hold the spray gun with both hands. Direct the water

jet to the object to be cleaned and squeeze the trigger.
Let go of the trigger of the spray gun, the water jet will stop and the machine

will switch off. Lock the trigger of the spray gun.
During longer breaks (longer than 5 minutes) switch off the machine using the

ON/OFF switch.
What out for the kickback when squeezing the trigger!

Due to the automatic start/stop mechanism, the motor works only with

a squeezed trigger.
Working with cleaning agents
Attention: The cleaning agent can be added only when the machine is used at a
low-pressure mode. Pull the pointed/flat jet head forwards.
Attention: When using a cleaning agent, you must observe the data safety sheets
of the manufacturer of the cleaning agent, especially the instructions
regarding personal protection equipment.
Attention: Use only a cleaning agent specifically suitable for high-pressure
cleaners.
 Remove the cap of the cleaning agent that you will
use.
 Remove the cap of the tank for the cleaning agent in
the machine.
 Fill the tank with the cleaning agent.
 Reinsert the hose and return the cap.
 Spray a bit of cleaning agent on the dry surface; let it
react, but not dry.
 Using the cleaning agent button, you can control the
quantity of additional cleaning agent.
 Spray off the loose dirt with high pressure.

Switching off

 Let go of the trigger of the spray gun.
 Turn off the machine switch using the OFF/ON
switch.
 Close the water supply.
 Let any pressure escape by squeezing the trigger
until no water comes out of the nozzle.
 Take the plug out of the socket.
46