Removal - EUROM Force 3000 IND Manual D'instructions

Problem
The machine
vibrates
The machine
starts but does
not deliver water
The machine
starts and stops
regularly by itself
The fuse is blown -
In case of other problems, contact your dealer!

Removal

In the EU this symbol indicates that this product may not be
disposed of as ordinary household waste. Old equipment contains
valuable materials, suitable for recycling. These materials should
be made suitable for reuse in order to prevent any adverse effects
to health and the environment caused by unregulated waste
collection. Therefore, please make sure that you bring old
equipment to a designated collection point. Alternatively, contact
the original supplier, who can make sure that as many of the
components as possible can be recycled.
Cause
- Air in the water supply
hose
- Problems in the water
provisioning
- Nozzle is partly blocked
- Water inlet filter is dirty
- Hose is kinked
- Pump, hose or accessories
are frozen
- No water supply
- Filter is blocked
- Nozzle is blocked
- Pump or spray gun leak
The electrical system is
too weak
Solution
- Let the air escape by
running water through the
switched off machine.
- Use water supply provision
that complies with the
requirements. Do not use a
hose that is too long or too
thin (min. ½")
- Clean the nozzle
- Clean the filter
- Keep the hose straight
- Let the pump, hose and
accessories defrost and
check them
- Provide water
- Clean the filter
- Clean the nozzle
- Have the pump or spray
gun repaired or replaced
- Connect the machine to a
heavy-duty electrical
system. Do not use an
extension cable.
49