Notes - Minolta DYNAX 9 Ti Mode D'emploi

In honor of being awarded the Japan Camera Grand Prix award for the
− 9 camera*, Minolta Co., Ltd. is proud to offer the DYNAX 9Ti /
MAXXUM 9Ti (Titanium model) limited edition camera. One thousand
cameras will be produced. This camera possesses all the same award
winning features of the DYNAX 9 / MAXXUM 9 model, plus some
additional features that will provide even more opportunities to enhance
your photographic creativety and enjoyment.
Minolta, for the first time, employs a magnesium alloy for the camera
base, and titanium for the upper shell of the SLR camera body to pro-
vide a slightweight and strong camera. Wet-type rubber is used to pro-
vide a non-slip touch. Other features such as a 100% viewfinder, top
continuous drive speed of 5.5 frames per second (4.5 frames per sec-
ond with autofocus tracking), shutter speeds up to 1/12000 second,
and easy-to-operate controls are inherited from the DYNAX 9 /
MAXXUM 9 model.
To get the most from your camera, please familiarize youself with both
the DYNAX 9 / MAXXUM 9 manual and this manual.
* Japanese version of DYNAX 9 / MAXXUM 9
4

NOTES

-When using your camera with Wireless Controller IR-1
frame mode with the camera's built-in flash, the built-in flash may not
start charging until the IR-1 transmitting button is pressed and the first
N
picture may not be taken. The shutter is released each time the button
is pressed again. In both continous and single-frame mode, the built-in
flash will keep charging until either the built-in flash is down or the
camera's main switch is moved to LOCK.
-Total camera weight is reduced to 825g by using titanium and
magnesium alloys for the outer shell.
-When using the camera in bright sunlight on warm days, use caution.
The temperature of the metal body can become very warm.
-Data Memory Back DM-9, Vertical Control Grip VC-9, and other
accessories are available for use with the DYNAX 9Ti / MAXXUM 9 Ti
camera.
-This manual replaces pages 91 to 102 in the DYNAX 9 / MAXXUM 9
manual, covering the custom functions. New features found in the
Custom Functions include;
• Cust 14 -The LED glowing time of selected local-focus area can be
extended.
• Cust 18 -The P /Ps creative program control is available with the
A
front control dial, while the control of the exposure compensation is
available with the rear control dial.
• Cust 22 -The AF illuminator can be cancelled.
• Cust 23 -To prevent accidental turning of the dials while carrying the
camera, the front/rear control dials can be disengaged when the
exposure is not being metered.
in single-
N
5