Dometic Midi Heki Style 700 x 500 Instructions De Montage Et De Service page 9

Midi Heki Style 700 x 500
7.1 Temple version
➤ Remove the protective film from both sides of the acrylic glass.
I
NOTE
If the protective film is exposed to sunlight for too long, it cannot be
taken off without leaving a residue.
➤ After installing, check the roof light works properly.
➤ If necessary, enter the new vehicle height and weight in the vehicle documents.
7.2 Geared version
➤ Put the hand crank to the closed position.
When setting up the inner frame, position the crank in such a way that when
folded, a light pre load is noticeable.
A
NOTICE!
Hold the hand crank in the open position when placing the inner frame
on the outer frame, otherwise the position of the hand crank will be mis-
aligned with the hexagon part.
➤ Check the functions of the window:
– Open the roof light (see chapter "Using the temple version" on page 10).
– Adjust the insect and the black roller blind.
➤ Remove the protective film from both sides of the acrylic glass.
I
NOTE
If the protective film is exposed to sunlight for too long, it cannot be
taken off without leaving a residue.
➤ If necessary, enter the new vehicle height and weight in the vehicle documents.
EN
Installing the Midi Heki Style
9