Using the Midi Heki Style
8
Using the Midi Heki Style
8.1
Using the temple version
Opening and closing the Midi Heki Style (fig. a)
➤ Press the release button (1), and open the roof hood with the bracket at the same
time (2).
Opening the roof light completely
➤ Slide the bracket (2) into theI position.
Opening the roof light to the half-way position
➤ Slide the bracket (2) into theII position.
Opening the roof light to the continuous ventilation position
➤ Slide the bracket (2) into the III position.
Closing the roof light
➤ Slide the bracket (2) into the lV position.
➤ Guide the bracket (2) with slight pressure to the left and right via the catches (3)
so that the roof hood is locked and the bracket (2) is on the release button (1).
Locking the roof light in intermediate position or continuous ventilation
➤ Push the lock (4) left and then down and to the right.
8.2
Using the temple version
Opening and closing the Midi Heki Style (fig. a)
➤ To open: turn the hand crank according to the direction of the arrow on the
crank.
Turn the hand crank until you feel its resistance. The opening angle of the roof
light is approx. 65°.
Fold the hand crank into the desired position.
➤ To close: turn the hand crank according to the direction of the arrow on the
crank.
Turn the hand crank until you feel its resistance.
➤ Check whether the roof light is locked properly: Try to push up the pane of glass
with your hand (without using force).
10
Midi Heki Style 700 x 500
EN