Installing The Midi Heki Style - Dometic Midi Heki Style 700 x 500 Instructions De Montage Et De Service

Midi Heki Style 700 x 500
7

Installing the Midi Heki Style

fig. 4
Supplements
The scope of delivery includes a mounting frame, which is suitable for a roof
thickness of 30 – 34 mm. For a roof thickness of 25 – 29 mm and 35 – 60 mm,
you need to have a suitable mounting set (see table).
➤ Measure your roof thickness W.
➤ Choose a suitable mounting set:
Roof thickness
25 – 29 mm
30 – 34 mm
35 – 42 mm
43 – 52 mm
53 – 60 mm
A
NOTICE!
Make sure that you do not damage any cables during installation.
fig. 5
See
➤ Check that the roof light has sufficient space around it (approx.1 to 2 mm) in the
wall section.
fig. 6
See
➤ Clean the roof opening in the mounting area.
fig. 7
See
A
NOTICE!
Observe the sealant manufacturer's instructions.
➤ Seal the mounting frame with a flexible non-hardening sealing compound (e.g.
SikaLastomer-710).
fig. 8
See
➤ Check the direction of travel when installing.
You can fit the roof light sideways (hinge-side at front in direction of travel) or
lengthways (hinge-side on left or right in direction of travel).
EN
Installing the Midi Heki Style
Ref. no.
9104100261
Included in the scope of delivery
9104100262
9104100263
9104100264
9104100265
7