FreshJet
9
Operating the roof air conditioner
9.1
Basic notes on operation
The roof air conditioner has four operating modes:
Operating mode
Off
Stand-by
On
Winter mode
You can use the control panel to
• switch the roof air conditioner on, off, to stand-by mode or to winter mode
• switch the light on and off or dim it
You can use the remote control to
• switch the roof air conditioner to and from stand-by mode.
• switch the light on and off or dim it
• make the settings
• select additional functions
9.2
Using the remote control
The remote control must be pointed at the IR receiver (fig. 2
control panel during operation.
➤ Press a button.
✓ The value is transmitted directly to the roof air conditioner.
✓ The roof air conditioner confirms the receipt of data with a high note.
If data transmission failed, point the remote control to the IR receiver on the control
panel and press the SET button. This transmits the data to the roof air conditioner.
The roof air conditioner confirms the receipt of data with a high note.
EN
Features
The roof air conditioner is switched off.
The remote control is inactive.
The roof air conditioning is ready for operation and can be switched
on with the remote control. The lights are available.
The roof air conditioner is conditioning the air in the interior.
The roof air conditioner operates in a special heating mode that starts
at a temperature of 7 °C and stops when the temperature rises above
10 °C.
Operating the roof air conditioner
page 4) on the
4,
27