Synchro-Recording With The Audio Component Of Your Choice (Music Synchro-Recording); Synchro-Recording With A Sony Cd Player (Cd Synchro- Recording) - Sony MDS-JB940 Mode D'emploi

Synchro-recording with
the audio component of
your choice
(Music Synchro-
recording)
The Music Synchro-recording allows you to automatically
synchronize recording to the MD deck with the playing of
the selected program source. The Track Marking
Function, however, will differ according to the program
source. For details, see "Marking track numbers while
recording" on page 19.
` / 1
Z
H
X x
. > z
m M
X . >
1
Do steps 1 to 5 of "Recording to an MD" on
page 14.
2
Press MUSIC SYNC.
The deck changes to recording pause.
3
Start playing the program source.
Recording starts automatically.
To stop Music Synchro-recording
Press x.
Note
During Music Synchro-recording, Smart Space and Auto Cut
will operate regardless of their setting ("S.Space On" or
"S.Space Off").
Synchro-recording with the audio component of your choice/Synchro-recording with a Sony CD player
Z
MUSIC SYNC
Synchro-recording
with a Sony CD player
(CD Synchro-recording)
When the deck is connected to a Sony CD player or Hi-Fi
component system, you can easily copy the contents of
CDs to the MD using the deck's remote. Because the MD
remote operates both the MD deck and the CD player or
CD player section of the component system, make sure to
place the MD deck and the CD player as close together as
possible.
Z
H
.
CD-SYNC START
m
CD-SYNC STOP
X .
CD PLAYER X
CD PLAYER ./>
1
Turn on the amplifier and the CD player, and select
CD on the amplifier.
2
Do steps 2 to 5 of "Recording to an MD" on
page 14.
3
Insert a CD into the CD player and select the
playing mode (Shuffle Play, Program Play, etc.) on
the CD player.
4
Press CD-SYNC STANDBY.
The CD player changes to play standby and the MD
deck changes to recording standby.
5
Press CD-SYNC START.
The deck starts recording and the CD player starts to
play.
The track number and elapsed recording time of the
track appear in the display.
If the CD player does not start playing
Some CD players may not respond when you press CD-
SYNC START. Press X on the CD player's remote
instead to start play on the CD player.
Z
` / 1
TIME
X x
> z
CD-SYNC STANDBY
M
>
21
GB