Features; Connecting Cables; Example Of System Configuration - Sony BRU-SF10 Mode D'emploi

Features

The BRU-SF10 HD Optical Multiplex Unit is designed
to connect the BRC-Z330 HD Color Video Camera.
Long-distance transmission via optical fiber
cable
The BRU-SF10 is equipped with a camera connector to
allow the connection of single optical fiber cable. You
can connect the BRC-Z330 HD camera from up to
2,000 m (6,562 feet) away by inserting the BRBK-SF1
HD Optical Multiplex Card into the HD camera and
using the CCFC-S200 Optical Fiber Cable.
Two interface card slots equipped
The BRU-SF10 is equipped as standard with an RGB/
component video output (D-sub 15-pin). In addition to
this connector, two interface card slots allow the unit to
be equipped with various SD analog signal outputs such
as composite video, S video, component video and RGB
outputs, and digital signal outputs such as SD-SDI
signal and HD-SDI signal outputs.
External sync signal input/output equipped
When multiple BRC-Z330 HD cameras are connected
via the Optical Fiber Cable, the video signal can be
synchronized by inputting the sync signal into the
external sync input connector.
Audio line output connectors (phono jacks,
L/R) equipped
The BRU-SF10 allows output of stereo audio line
signals that are transmitted from the BRBK-SF1 HD
Optical Multiplex Card inserted into the BRC-Z330 HD
camera.

Connecting Cables

Use the following connecting cable to connect devices
in this system.
Cable
RS-232C cable
(3 m (10 feet))
RS-232C cable
4
GB
Features
Part No. Number
1-590-879-34 1

Example of System Configuration

1 2 3 4 5 6 7 8 9 IR SELECT
VISCA RS-422
!
DC IN 12V IN VISCA RS-232C OUT
to AC outlet
BRBK-SF1 HD Optical
Multiplex Card
CAMERA
IN OUT
CAMERA EXT SYNC
RGB/COMPONENT
to RGB/
connecting
component
cable with
input D-sub 15-pin
connectors
HD monitor, etc.
VISCA RS-232C
RM-BR300 Remote Control Unit
* The VISCA RS-422 connection is also available if you use the
VISCA RS-422 connectors.
HD camera
BRC-Z330
1
OFF ON
2
DATA MIX
3
OFF ON
EXT SYNC IN
75
S VIDEO VIDEO
RGB/COMPONENT
Optical connector
CCFC-S200 Optical
Fiber Cable
BRU-SF10 HD
IN OUT
1 2 3 4 5 6 7 8 9
RGB/COMPONENT VISCA RS232C VISCA RS422 Optical Multiplex
L AUDIO OUT
FUNCTION Unit (this unit)
R 1
10
DC IN 12V
to AC outlet
VISCA RS-232C IN
RS-232C cable
(supplied with the
RM-BR300 and
BRU-SF10 (this unit))*
to AC outlet