Sony MDS-JB940 Mode D'emploi page 32

Erasing all the tracks on an MD
Do the procedure below to erase all the tracks, track
names, and disc name at once.
1
While the deck is stopped, playing, or paused,
press MENU/NO.
"Edit Menu" appears in the display.
2 Turn AMS (or press ./> repeatedly) until "All
Erase ?" appears, then press AMS or YES.
"All Erase ??" appears in the display.
3
Press AMS or YES.
"Complete!!" appears for a few seconds and all the
tracks, track names, and disc name are erased.
To cancel the operation
Press MENU/NO or x.
Erasing a portion of a track
You can easily erase a portion of a track by specifying the
starting and ending points of the erasure.
This is useful for erasing the unnecessary portions of a
track recorded from a satellite or FM broadcast.
Example: Erasing portion "B2" of the second
track
AAA BBB
1 2
B1
AAA BBB
1 2
B1
1
While the deck is stopped, playing, or paused,
press MENU/NO.
"Edit Menu" appears in the display.
2 Turn AMS (or press ./> repeatedly) until "A-B
Erase ?" appears, then press AMS or YES.
3 Turn AMS (or press ./> repeatedly) until the
number of the track containing the portion to be
erased appears, then press AMS or YES.
"-Rehearsal-" and "Point A ok?" alternate in the
display and the deck plays the first several seconds of
the track repeatedly.
4
While monitoring the sound, turn AMS (or press
./> repeatedly) to locate the starting point of
the portion to be erased (point A).
You can shift the starting point by 1-frame* intervals
(1 frame = 1/86 second).
The time indication (minute, second, and frame) of the
current point is displayed and the deck plays several
seconds of the track to that point repeatedly.
32
GB
Erasing tracks
CCC
3
B2 B3
CCC
3
B3
* When recording in Stereo mode, you can shift
starting point by 2-frame intervals (
LP2 Stereo mode) or by 4-frame intervals
mode and
(in LP4 Stereo mode).
To find a point quickly
Specify a unit (minute, second, or frame) by which the
MD is advanced when you turn AMS (or press ./
> repeatedly).
To do this, press m/M in step 4 repeatedly to select
minute, second, or frame. The selected unit flashes in
the display.
5
Repeat step 4 until you have located point A.
6
Press AMS or YES to enter point A.
"Point B set" appears and the deck starts playing from
point A until the track ends.
7 Continue playing the track or press M to locate
the ending point of the portion to be erased (point
B), then press AMS or YES.
"A-B Ers" and "Point B ok?" alternate in the display
and a few seconds of the track before point A and after
point B play back repeatedly.
8
Repeat step 4 until you have located point B.
9
Press AMS or YES to enter point B.
"Complete!!" appears for a few seconds and the
portion between point A and B is erased.
To cancel the operation
Press MENU/NO or x.
Note
If "Impossible" appears in the display, you cannot erase a
portion of a track. This happens when you have edited the same
track many times.
This is due to a technical limitation of the MD system and is not
a mechanical error.
the
in Monaural