Playing Mds; Playing An Md - Sony MDS-JB940 Mode D'emploi

Playing MDs

This chapter explains the various ways
to play MDs.

Playing an MD

?/1
1
Turn on the amplifier and select MD on the
amplifier.
2 Press ?/1 to turn on the deck.
The STANDBY indicator turns off.
3
Insert an MD.
4 If necessary, turn AMS (or press > repeatedly) to
locate the track you want to start playing from.
If you want to play from the first track, skip this step
and go to step 5.
5 Press H.
The deck starts to play.
6
Adjust the volume on the amplifier.
Operations you may want to do during play
To
Stop play
Pause play
Resume play after pausing
Locate a succeeding track
Locate the beginning of the
current track or a preceding
track
Eject the MD
z
When you play an MD recorded in LP2 or LP4 Stereo
mode
The MD LP indicator lights up when you press H in step 5
above.
z
To use headphones
Connect them to the PHONES jack. Turn PHONE LEVEL (or
press REC LEVEL/ANALOG OUT LEVEL +/– repeatedly) to
adjust the volume.
z
You can adjust the analog signal level output to the
ANALOG OUT jacks and the PHONES jack
1 While the deck is playing, press DISPLAY/CHAR (or
DISPLAY) repeatedly until the line output adjustment display
appears.
2 Press REC LEVEL/ANALOG OUT LEVEL +/– on the
remote repeatedly to adjust the output signal level.
H
AMS
Press or turn
x
X
H or X
AMS clockwise (or press >
repeatedly)
AMS counterclockwise (or
press . repeatedly)
EJECT A after stopping play
23
Playing an MD
GB