Display Messages - Sony MDS-JB940 Mode D'emploi

Display messages

The following table explains the various messages that
appear in the display. Messages are also displayed by the
deck's Self-diagnosis function (see page 53).
Message Meaning
Auto Cut The Auto Cut Function is on (page 19).
A new (blank) or erased MD has been
Blank Disc
inserted.
An attempt was made to make a second
Cannot Copy copy from a digitally dubbed MD
(page 52).
An attempt was made to edit a
premastered MD, to edit the MD
Cannot Edit during Program or Shuffle Play or to
change the recording level of an MD
recorded in LP2 or LP4 Stereo mode.
Disc Full The MD is full (page 51).
You pressed ?/1 while in S.F Edit
(changing the recording level after
recording, Fade-in, Fade-out) mode.
If you turn off the deck while in S.F
Edit mode, any changes that you have
Edit NOW
made will not be made properly. Finish
the changes and leave S.F Edit mode
before turning off the deck. If you
accidentally turn off the deck while
changes are being made, press ?/1
while the message is displayed.
The deck cannot do the specified
Impossible
operation (pages 15, 32 and 34).
The S.F Edit (changing the recording
level after recording, Fade-in, Fade-
out) operation was not performed
Incomplete!
properly because the deck was moved
while recording was in progress or the
MD is damaged or dirty.
The Setup Menu settings have been
lost.
Or the contents recorded by the timer
have disappeared over time and are not
be available for saving to disc, or
Initialize (flashing) Program Play could not be activated
since the program has disappeared over
time.
(The message flashes for about four
seconds when you turn on the deck by
pressing ?/1.)
The naming capacity of the MD has
Name Full reached its limit (about 1,700
characters).
While attempting to change the
recording level after recording, you
No Change pressed MENU/NO without actually
changing the recording level, so no
change was made.
No Disc There is no MD in the deck.
No Name The track or disc has no name.
54
GB
Display messages
Message Meaning
You tried to start Program Play when
No Program!
no program exists.
An attempt was made to record to a
Premastered
premastered MD.
The program contains the maximum
ProgramFull number of tracks. You cannot add any
more tracks.
The MD is being controlled by an
REMOTE
external device connected to the deck.
You attempted to perform another
operation while in S.F Edit (changing
the recording level after recording,
S.F Edit!
Fade-in, Fade-out) mode.
You cannot perform any other
operations while in S.F Edit mode.
The Smart Space Function is on
Smart Space
(page 19).
The deck is checking the TOC (Table
TOC Reading
Of Contents) on the MD.
1) If "REMOTE" appears under other circumstances, turn off
the deck, then turn it on again.
1)