Tips For Recording From Mds To Tape - Sony MDS-JB940 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Tips for recording from
MDs to tape
Inserting blanks between tracks during
play (Auto Space)
The MD deck can be set to automatically insert a three-
second blank between tracks during play. This function is
useful when you're recording from an MD to an analog
tape. The three-second blank enables you to use the Multi-
AMS function later to locate the beginning of tracks on
the tape.
1
While the deck is stopped, press MENU/NO twice.
"Setup Menu" appears in the display.
2
Turn AMS (or press ./> repeatedly) until
"Auto Off" appears, then press AMS or YES.
3
Turn AMS (or press ./> repeatedly) to select
the setting, then press AMS or YES.
To
Turn on Auto Space
Turn off Auto Space
4
Press MENU/NO.
z
You can use the remote to turn Auto Space on or off
Z
While the deck is stopped, press A.SPACE repeatedly until
"Auto Space" or "Auto Off" appears in the display.
z
When you turn on Auto Space
"Auto Space" appears when the deck is inserting a blank
between tracks.
Notes
• If you select "Auto Space" and record a selection containing
multiple track numbers (for example, a medley or symphony),
blank spaces will be created on the tape between the various
sections.
• If you turn off the deck or disconnect the AC power cord, the
deck will store the last setting ("Auto Space" or "Auto Off")
and recall it the next time you turn on the deck.
Pausing after each track (Auto Pause)
You can set the MD deck so that it pauses after each track
to give you time to locate the next track to be recorded.
MENU/NO
AMS
YES
Select
Auto Space
Auto Off (factory setting)
1
While the deck is stopped, press MENU/NO twice.
"Setup Menu" appears in the display.
2
Turn AMS (or press ./> repeatedly) until
"Auto Off" appears, then press AMS or YES.
3
Turn AMS (or press ./> repeatedly) to select
the setting, then press AMS or YES.
To
Turn on Auto Pause
Turn off Auto Pause
4
Press MENU/NO.
To resume play after pausing
Press H.
z
You can use the remote to turn Auto Pause on or off
Z
While the deck is stopped, press A.SPACE repeatedly until
"Auto Pause" or "Auto Off" appears in the display.
z
When you turn on Auto Pause
"Auto Pause" appears during pause and disappears when the
deck resumes play.
Note
If you turn off the deck or disconnect the AC power cord, the
deck will store the last setting ("Auto Pause" or "Auto Off") and
recall it the next time you turn on the deck.

Tips for recording from MDs to tape

Select
Auto Pause
Auto Off (factory setting)
29
GB

Publicité

Chapitres

Table des Matières
loading

Table des Matières