Sony MDS-JB940 Mode D'emploi page 45

Synchronized recording
This function lets you conduct synchronized recording
between the MD deck and selected source component.
1
Set the source selector on the amplifier (or
receiver) to the source component.
2
Set the source component to playing pause mode
(make sure both the H and X indicators light
together).
3
Set the deck to recording pause mode.
4
Press X on the deck.
The source component is automatically released from
pause mode, and recording begins shortly thereafter.
When play ends from the source component, recording
stops.
z
You can use a special synchronized recording
This MD deck is equipped with a special synchronized recording
function that uses the CONTROL A1ΙΙ Control System (see
"Making a CD Synchro-recording from a Sony CD player
connected with a control A1ΙΙ cable" on page 22).
Note
Do not set more than one component to the pause mode.
Using the CONTROL A1ΙΙ control system
45
GB