z
You can change the duration of Fade-in and Fade-out
Play/Recording
1 While the deck is stopped, press MENU/NO twice.
"Setup Menu" appears in the display.
2 Turn AMS (or press ./> repeatedly) to select the
setting, then press AMS or YES.
To change the duration of
Fade-in Play/Recording
Fade-out Play/Recording
3 Turn AMS (or press ./> repeatedly) to select the
duration, then press AMS or YES.
Both the Fade-in and Fade-out durations can be set in 0.1
second steps.
4 Press MENU/NO.
Select
F.in
F.out
Falling asleep to music
(Sleep Timer)
You can set the deck so that it turns off automatically after
a specified duration.
1
While the deck is stopped, press MENU/NO twice.
"Setup Menu" appears in the display.
2
Turn AMS (or press ./> repeatedly) until
"Sleep Off" appears in the display, then press AMS
or YES.
3
Turn AMS (or press ./> repeatedly) to select
the setting, then press AMS or YES.
To
Turn on Sleep Timer
Turn off Sleep Timer
4
Turn AMS (or press ./> repeatedly) until
"Sleep 60min" appears in the display, then press
AMS or YES.
5
Turn AMS (or press ./> repeatedly) to select
the time to be turned off ("30min," "60min" (factory
setting), "90min," or "120min"), then press AMS or
YES.
6
Press MENU/NO.
To turn off Sleep Timer
Repeat the procedure above, selecting "Sleep Off" in step
3.
z
You can check the remaining time
Once you turn on Sleep Timer, the remaining time is displayed
when you select "Sleep" in Setup Menu.
Fading in and fading out/Falling asleep to music
MENU/NO
AMS
YES
Select
Sleep On
Sleep Off (factory setting)
41
GB