Terms Of Warranty; Disclaimer Of Liability; Specifi Cation And Ordering Information - Camille Bauer KINAX HW730 Mode D'emploi

10. Maintenance
The device is free of maintenance. Repairs may only be
carried out by authorized authorities.

11. Terms of warranty

Camille Bauer Metrawatt AG warrants the fl awless condi-
tion of the product with respect to material, manufacturing
and function and offers a standard warranty of 36 months.
Such warranty becomes effective upon delivery of the
product to the customer. Camille Bauer Metrawatt AG re-
serves the right to amend the terms of warranty any time
with future effect.
Any defects shall be communicated by the buyer immedi-
ately after discovery. The rejected products shall be sent
in proper packaging and with suffi cient transport protec-
tion to one of our authorised service centres. The sender
shall bear the shipping risk.
13. Specifi cation and ordering information
Description
KINAX HW730
1. Version
Standard
ATEX EX II 2G Ex ia IIC T4 Gb
II 2D Ex ia IIIC T80°C Db
ATEX EX II 2D Ex tb IIIC T80°C Db
IECEx Ex ia IIC T4 Gb
Ex ia IIIC T80°C Db
IECEx Ex tb IIIC T80°C Db
2. Angle area mechanically
Single-Turn (360°)
3. Hollow-shaft diameter
Hollow-shaft 10 mm [0.393"], electrically insulating
Hollow-shaft 12 mm [0.472"], electrically insulating
Hollow-shaft 16 mm [0.629"], electrically insulating
Hollow-shaft 20 mm [0.787"], electrically insulating
Hollow-shaft 30 mm [1.181"], non-insulating, standard
Hollow-shaft 18 mm, electrically insulatinge
Hollow-shaft 1/2'' (12.7mm), electrically insulating
Hollow-shaft 5/8'' (15.875mm), electrically insulating
Hollow-shaft 3/4''(19.05mm), electrically insulating
Hollow-shaft 7/8'' (22.225mm), electrically insulating
Hollow-shaft 1'' (25.4mm), electrically insulating
4. Torque support
Standard
5. Output variable
Current, 4...20 mA, two-wire
Modbus TCP/IP with PoE
6. Electrical connections
Gland standard
Gland with increased strain relief
Sensor plug M12x1
Sensor plug M12x1 d-coded
Camille Bauer Metrawatt
Any defects arising due to improper treatment, faulty
installation, mechanical damage, failure to perform mainte-
nance work, inappropriate use and connection to improper
power supply shall be excluded from any kind of warranty.
In case of repair work, alterations or tampering on the part
of the buyer or any unauthorised third parties, any war-
ranty claim shall lapse.

12. Disclaimer of liability

The content of this document has been reviewed to
ensure correctness. Nevertheless it may contain errors or
inconsistencies and we cannot guarantee completeness
and correctness. This is especially true for different langu-
age versions of this document. This document is regularly
reviewed and updated. Necessary corrections will be
included in subsequent version and are available via our
webpage http://www.camillebauer.com.
Order code 730 - xxxx xxxx xx
Operating Instructions HW730 Be
Impossible
Locking
with locking
code
code
A
A
A
A
B
C A
A
A, C
A, B
Article No
/ Feature
730 –
1
2
3
4
5
1
1
2
3
4
5
6
A
B
C
D
E
1
1
2
1
2
3
4
21