Accessories; Environmental Protection; Eu - Declaration Of Conformity; Stihl Rm 3.0 Rt, Rm 3.0 Rtx - Stihl RM 3 RT Manuel D'utilisation

– Use of fuel and lubricants not approved
by STIHL (lubricants, petrol and engine
oil, see engine manufacturer's
specifications).
– The use of tools or accessories which
are not approved or suitable for the
machine, or are of inferior quality.
– Improper use of the product.
– Use of the product for sporting or
competitive events.
– Resultant damage due to continued use
of the product with defective
components.
3. Maintenance operations
All operations listed in the section
"Maintenance" must be performed
regularly.
If these maintenance operations cannot be
carried out by the user, a specialist dealer
must be commissioned to perform them.
STIHL recommends that you have
maintenance operations and repairs
performed exclusively by a STIHL
specialist dealer.
STIHL specialist dealers regularly attend
training courses and are provided with
technical information.
If these operations are neglected, faults
may arise which are the responsibility of
the user.
These include:
– Corrosive and other resultant damage
caused by incorrect storage.
– Damage to the machine through the
use of inferior-quality spare parts.
44
– Damage due to untimely or inadequate
maintenance or damage due to
maintenance or repair work not
performed in the workshops of
specialist dealers.

15. Accessories

Disc Cut
6909 700 5106
16. Standard spare parts
Mowing blade (mulching blade)
6105 702 0121
Blade fastening screw
9008 319 9075
Retaining washer
0000 702 6600
The fastening elements for the
mowing blade (e.g. blade fastening
screw, retaining washer) must be
renewed when replacing the blade,
i.e. when installing the blade. Spare
parts are available from a STIHL
specialist dealer.

17. Environmental protection

Lawn clippings should be
composted and not disposed of
in household waste.
The machine, its packaging and
accessories are all produced
from recyclable materials and must be
disposed of accordingly.
By disposing of materials separately, and
in an environmentally friendly manner,
valuable resources can be re-used. For
this reason, the machine should be
disposed of for recycling at the end of its
useful life. Pay particular attention to the
information in the "Disposal" section
during disposal ( 4.9).
Consult your recycling centre or your
specialist dealer for information on the
proper disposal of waste products.
18. EU - Declaration of
conformity

18.1 STIHL RM 3.0 RT, RM 3.0 RTX

Lawn Mower

STIHL Tirol GmbH
Hans Peter Stihl-Strasse 5
6336 Langkampfen
Austria
declares under our sole responsibility that
– design: lawn mower
– manufacturer's brand: STIHL
– type: RM 3.0 RT, RM 3.0 RTX
– serial number: 6361
complies with the relevant provisions of
Directives 2000/14/EC, 2006/42/EC,
2014/30/EU and 2011/65/EU and has
been developed and manufactured in
accordance with the versions of the
following standards valid on the date of
manufacture: EN ISO 5395-1,
EN ISO 5395-2 and EN 14982 (where
applicable).
Name and address of relevant, named
location:
TÜV Rheinland LGA Products GmbH
Tillystrasse 2
D-90431 Nuremberg
0478 111 9938 A - EN