7.5.
removing the plastic Ball Valve
from the pipeline
WARNING!
danger when using aggressive media!
Leaking medium may cause injuries.
•
Ensure that the pipes have been connected correctly.
•
Regularly check that the plastic ball valve is not leaking.
•
Wear protective clothing.
procedure:
→
Turn off the pressure at a suitable location and vent the lines.
→
Unlock the union nuts by pressing on the Dual Block locking device
(Fig. 2: /16) according to Fig. 11:.
Fig. 11: Unlocking union nuts
Type 2657
Installation
The locking device can also be completely removed from the ball valve
housing (Fig. 2: /16).
→
Loosen the two union nuts (
from the line.
→
Before removing the valve, hold it vertically and open it by 45° to
remove any remaining liquid.
english
Fig. 2: /13) and remove the ball valve
21