Accessories; Before Initial Use; Attaching The Wall Bracket - Cleanmaxx 01463 Mode D'emploi

Accessories

• Use the crevice nozzle (11) to suck up dirt and dust. It is ideal for places which are
hard to get to, such as corners, crevices or recesses.
• The brush attachment (8) is placed directly onto the crevice nozzle. Use to remove
dust from delicate objects such as picture frames, lamp shades, keyboards, books
etc.
• Use the wet nozzle (7) to remove wet dirt and small quantities of liquid on smooth
surfaces.
• The wall bracket (13) with storage area for the nozzles (12) and a recess for the bar-
rel connector (14) of the mains adapter is intended to be used for storing the device
in a way that saves space and for charging the battery.

Before Initial Use

1. Before using the device, remove all packaging materials and any labels that may be
on the device and are used for protection during transportation or for advertising.
Never remove the rating plate and any possible warnings!
2. Attach the wall bracket (13) (see the "Attaching the Wall Bracket" chapter).
3. Charge the battery (see the "Charging Up the Battery" chapter).

Attaching the Wall Bracket

PLEASE NOTE!
■ Use the fastening material supplied to hang up the wall bracket. If you are unsure
whether the fastening material supplied is suitable for the wall, seek advice from a
specialist stockist.
■ Hang the wall bracket in a secure and solid place.
■ Before drilling, ensure that there are no pipes or cables behind the intended drilling
point.
1. Drill holes at the correct distance into the wall and place dowels in them.
2. Screw the screws into the dowels. They should protrude by approx. 5 mm out of the
wall.
3. Hang the wall bracket on the screws.
19 EN