Cleaning And Storage - Cleanmaxx 01463 Mode D'emploi

Cleaning and Storage

PLEASE NOTE!
■ Never use soap or other cleaning products to clean the dust fi lter. This would cause
damage to the dust fi lter.
■ The dust fi lter must not be cleaned with water.
■ Only reassemble the device once all of the parts are completely dry.
■ Do not use any sharp or abrasive cleaning agents for cleaning. They could damage
the surfaces.
4. Empty the collecting container over a dustbin.
5. Tap out the dust fi lter over a dustbin. Brush off with a soft brush if necessary.
6. Clean the collecting container and the fi lter holder with clear, lukewarm water if
necessary.
7. Allow all parts to dry completely before reassembling them. Only ever dry them in
the air, and never use a hair dryer to do so.
Storage
21
1. Hold the device securely by the handle (1) and press the
release button (4). The collecting container (6) is released
and can be pulled off.
2. Pull the dust fi lter (10) with the fi lter holder out of the col-
lecting container.
3. Pull the dust fi lter out of the fi lter holder.
• Store the device in a cool, dry place which is protected
from direct sunlight and is out of the reach of children and
animals.
• For easy storage, hook the device with the handle (1)
pointing downwards into the wall bracket that is also sup-
plied and place the nozzles into the storage area (12).
EN