Interroll MultiControl AI Notice D'utilisation page 58

Assistance in the event of faults
Power Ready
- -
- -
- -
- -
- -
- -
If several errors occur at the same time, only the error with the highest priority is displayed.
To eliminate the errors, refer to „Troubleshooting" on page 59.
¾
58 of 140
Net run Fault
- Flashes x6
- Flashes x7
- Flashes x8
- Flashes x9
- Flashes x10
- Flashes x11
Meaning
Voltage error, overvoltage
Temperature in the MultiControl too high.
Overload protection for the brake resistor
active.
Handshake communication interrupted.
See instructions on ZPA and ZPA+
applications.
No connection to the neighbouring
devices. See instructions on ZPA and ZPA+
applications.
A configured neighbouring device has an
error (see ZPA+, "RemoteEmergency" in
the error log)
Translation of the original operating manual
Priority
4
6
7
Version 2.7 (05/2021) UL