Interroll MultiControl AI Notice D'utilisation page 43

Function
Control output 3
Control output 4
Control output 5–8
Handshake in up
Handshake in down
Handshake in left
Handshake in right
Handshake out up
Handshake out down
Handshake out left
Handshake out right
VDC motor #1 error in
VDC motor #2 error in
VDC motor #1 direction out
VDC motor #2 direction out
VDC motor #1 step pulse out
VDC motor #2 step pulse out
The functions have no influence on the "I/O device" control program.
Shutdown Aux Output
Not activated The aux outputs are reset when the RollerDrive voltage is switched off and cannot be
controlled.
Activated The Aux outputs keep their current status when the RollerDrive voltage is switched off and can
still be controlled.
The functions vary depending on the selected control program (see the description of control programs in
the "MultiControl / RollerDrive - Start-up and Programming" supplement).
Press the "Submit" button to transfer the modified parameters to the MultiControl.
Version 2.7 (05/2021) UL
Translation of the original operating manual
Description
Zone 3 occupied
Zone 4 occupied
No function
Handshake signals to neighbouring ZPA modules
VDC motor error input
VDC motor directional rotation
VDC motor pulse output
Start-up and operation
43 of 140