Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Safety-related information
2
Safety-related information
2.1
State of the art
The Interroll MultiControl has been constructed with respect to applicable standards and the current state of the art
and has been delivered in a condition that is safe to operate. Nevertheless, hazards can occur as a result of use.
Non-compliance with the instructions in this operating manual can result in life-threatening injuries.
In addition, the applicable local accident prevention regulations for the area of application and general safety
regulations must be adhered to.
2.2
Proper use
The MultiControl may only be used in an industrial environment for industrial purposes within the stipulated
performance limits that are given in the technical specifications.
It controls up to four Interroll RollerDrives or VDC motors and must be integrated into a conveyor unit or conveyor
system before commissioning.
A suitable adapter must be used for connecting a VDC motor.
The MultiControl AI, 24 V DC can also be used to control the Interroll PalletControl.
Application field
The following applications are possible:
Use of a PLC
No
Yes
Yes
10 of 140
Function of a PLC
None
• Influence on ZPA logic
• Tracking of material to be
conveyed
• Error diagnosis
• The PLC program controls all
connected RollerDrives
• Tracking of material to be
conveyed
• Error diagnosis
Function of the MultiControl
Implementation of PLC specifications
Function as network card
Sends the status of all sensors and the
RollerDrive and, if necessary, error
information to the PLC
Version 2.7 (05/2021) UL
Translation of the original operating manual
Publicité
Chapitres
Table des Matières
