Procedure In The Event Of Accidents Or Faults - Interroll MultiControl AI Notice D'utilisation

Start-up and operation
6.7

Procedure in the event of accidents or faults

Stop the conveyor system immediately, switch off the power supply and ensure that it cannot be unintentionally
¾
switched on again.
In the event of an accident: Perform first aid and call for the emergency services.
¾
Inform the relevant supervisor.
¾
Have specialist personnel rectify the fault.
¾
Only resume operating the conveyor system once this has been approved by the specialist personnel.
¾
54 of 140
Version 2.7 (05/2021) UL
Translation of the original operating manual