Switching The Answering Machine On/Off - switel DET177X Mode D'emploi

Answering Machine
6 Answering Machine
All the functions provided on your Telephone Answering Machine (TAM) can be operated via the handset
and also directly on the base station. The answering machine is equipped with a vocal operator guidance.
Observe the instructions and information provided.
Answering machine, TAM Settings menu
Proceed as follows to open the answering machine's Answer Settings menu:

+ or , TAM SETTINGS , 

Switching the answering machine on/off

Using the base station:
’
After switching the answering machine on, the outgoing message currently set is played.
Using the handset TAM Settings menu :
+ or , ANS ON/OFF , 
+ or , ON or
OFF , 
Setting the number of rings (answer delay)
You can select from 2 to 9 ringing tones before the incoming call is taken or the Tollsaver setting for pre−
remote access free of charge. The toll−saving pre−remote access feature can be used to check whether new
messages have been received on your answering machine from a distant telephone.
S
If your call is taken after 2 rings, there are new messages on the answering machine.
S
If no messages have been recorded, the call is taken after 6 rings. Place the receiver on−hook before
the 6th ring. This means that no charges ensue.
Further information on remote access is available on Page 103.
Setting the number of rings
Using the base station:
2 sec m
m
The setting selected is announced and saved.
Using the handset TAM Settings menu:
+ or , ANS DELAY , 
+ or , e.g: 5 , 
Check the current setting
Using the base station:
m
98
72
Open the main menu
Open the TAM Settings menu
Switch the answering machine on/off
Select the function and confirm
Select the setting and confirm it
Select the required setting mode
Select the required setting
Select the function and confirm
Select the setting and confirm it
Check the setting