switel DET177X Mode D'emploi page 92

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Putting the Telephone into Operation
Connecting the charging station
Connect the charging station as
illustrated in the diagram.
For safety reasons, only use the
power adapter plug supplied.
Inserting the batteries
Insert the batteries in the open battery compart-
ment. Only use batteries of the type AAA Ni−MH
1.2V. Pay attention to correct polarity. Close the
battery compartment cover.
Charging the batteries
Before the handset is used for the first time, insert it in the base station / charging station for at least
15 hours.
When the handset is inserted in the base / charging station properly, you will hear a confirmation signal and
the charge control lamp lights up. The handset warms up during the charging process. This is normal and
does not represent a risk. Do not charge the handset with charging units from other manufacturers.
The current battery charge status is indicated in the display:
Full
Private branch exchanges
The information on Page 105 explains how to install your telephone in a private branch exchange.
Setting the weekday and time on the answering machine
The information on Page 99 explains how to set the weekday and time on the answering machine.
Only applies to telephone sets with at least two handsets . Checking the package contents" on Page 91.
1
92
1
Mains power outlet
66
Half empty
Low
Empty

Publicité

Table des Matières
loading

Table des Matières