Stihl MSA 300.0 Notice D'emploi page 6

English
3 Saw Chain
Toothed cutting tool consisting of cutters, tie straps and
drive links.
4 Guide Bar
Supports and guides the saw chain.
5 Chain Catcher
Helps contain the saw chain and reduce the risk of
operator contact in the event the chain breaks or comes
off the bar.
6 Tensioning Gear
Shifts the guide bar and tensions or loosens the saw
chain.
7 Chain Sprocket
Drives the saw chain.
8 Chain Sprocket Cover
Covers the chain sprocket.
9 Nuts
Tighten the chain sprocket cover.
10 Bumper
For mounting an additional bumper spike.
11 Chain Scabbard
Covers the guide bar and saw chain to reduce the risk of
injury from inadvertent contact during transportation and
storage.
12 Front Hand Guard
Helps protect the operator's left hand from projecting
branches and contact with the saw chain. Serves as the
activation lever for the chain brake.
13 Front Handle
Handle for the operator's left hand.
14 Locking Levers
Secure the battery in the battery compartment.
15 Battery Compartment
Holds the battery.
16 Trigger Switch Lockout
Prevents activation of the trigger switch until depressed.
4
17 Rear Handle
Handle for the operator's right hand.
18 Trigger Switch
Switches the motor on and off.
19 Retaining Button
For switching the chain saw on.
20 Mounting Recess
Mounting area for a Smart Connector 2 A.
21 Power Level Selector
For selecting the power level.
22 Oil Filler Cap
For closing the oil tank.
23 Gunning Sight
Helps the operator determine the direction of fall when
making a felling notch.
24 Oil Flow Adjusting Screw
For adjusting the amount of chain oil.
25 "STATUS" LED
Indicates the operational status of the chain saw. When
the LED is flashing it indicates that the saw is in standby
mode and ready for use.
26 "TEMPERATURE" LED
Indicates that the chain saw is too hot when illuminated.
27 "CHAIN BRAKE" LED
Indicates that the chain brake is engaged when
illuminated.
28 "POWER LEVEL" LEDs
Indicate the chain saw's power level.
29 Battery
Supplies electrical power to the motor.
30 Battery LEDs
Indicate the battery's state of charge and display error
messages regarding potential malfunctions in the battery
or power tool.
3 Main Parts
0458-009-8201-A