Data Transfer To Pc - Medela Thopaz Mode D'emploi

Set as standard
Thopaz is delivered with the following factory settings.

Data transfer to PC

XI
With the software ThopEasy all stored data can be transferred to a PC as documentation and
for completion of the patient records. The data can be expanded with patient information,
saved and printed.
The operating instructions for data transfer and the software ThopEasy can be found on the
Thopaz CD included in the scope of delivery.
cmH O is not a SI unit according to
2
EU Directive 80/181/EEC.
These settings can be changed and saved as
the new standard and are active whenever
Thopaz is switched on.
To save the selected settings, confirm pa‑
rameter 'Set as standard' with 'yes'.
Press 'back' to activate the standby mode.
Selection
max. -10 kPa / -100 cmH
kPa / cmH O / mbar / mmHg
2
mL/min / L/min
off / on
no / yes
Selection
Languages according to list
Display
Display
Display
EN
O
2
15