Horizon Fitness COMFORT 2.0 Manuel Du Propriétaire page 23

UPRIGHT BIKE ASSEMBLY
PRE-INSTALLED
SCREW
CRANK ARM
COMFORT 2.0 SHOWN
STEP 6
CONSOLE
CONSOLE MAST
RIGHT PEDAL
Note: There is no hardware needed at this step.
A HARDWARE is pre-installed.
B Attach the RIGHT PEDAL to the RIGHT CRANK
ARM, tightening it clockwise with the provided
13mm/15mm flat wrench.
C Attach the LEFT PEDAL onto the left crank arm,
tightening it counter-clockwise with the provided
13mm/15mm flat wrench. (NOTE: The left crank
arm is reversed threaded so it is very important that
it is tightened counter-clockwise. Tightening it the
opposite way can damage the pedal or the crank
arm or both.)
D Connect the CONSOLE CABLE and carefully tuck
into the CONSOLE MAST.
E Attach the CONSOLE to the CONSOLE MAST
using 4 PRE-INSTALLED SCREWS.
Note: You may need a 15mm wrench to assemble the
pedal. Please be care not to pinch yourself when
assembling.
Comfort
Upright
Bike
23