Main Frame - Horizon Fitness COMFORT 2.0 Manuel Du Propriétaire

UPRIGHT BIKE ASSEMBLY
SEAT HEIGHT
ADJUSTMENT KNOB

MAIN FRAME

COMFORT 2.0 SHOWN
STEP 2
Note: There is no hardware needed at this step.
A Attach the SEAT to the SEAT POST TUBE and
tighten the SEAT NUTS by using 13mm wrench.
SEAT
(You may need additional 13mm wrench to make
the seat assembly more easier.)
B Loosen the SEAT HEIGHT ADJUSTMENT KNOB
by turning it two half turns counter-clockwise.
C Then pull the SEAT HEIGHT ADJUSTMENT
KNOB outward while sliding the SEAT POST
SEAT POST TUBE
TUBE into the MAIN FRAME.
Note: While assembling the SEAT please make sure
the seat is in right position. Tilt up the front of the
SEAT might help you gain a more stable riding
experience.
Comfort
Upright
Bike
19