Falcon 1092 CT Dual Fuel Mode D'emploi page 16

English
Locate the tool as shown.
Turn the levelling tool clockwise, two full (180°)
turns. It will be stiff. The front of the oven will rise
slightly as the roller drops down. Open the grill
door and right hand oven door so that you can get
a good grip on the bottom of the fascia panel as
you move the oven.
Do not move the oven by pulling the handrail,
door handles or knobs. Make sure both electricity
and gas cables have sufficient slack to move the
cooker forward as you go along.
Move the oven a bit at a time, checking behind it to
make sure the gas hose is not caught. If a stability
chain is fitted, release it as you ease the cooker
out.
When you replace the cooker, wind it down off the
rollers by turning the levelling tool anti-clockwise.
This is important. It will stop the cooker moving
accidentally, while in use.
16